Accessories
7007 4-Band EQ / 9-Volt Line-Driver Multiple-Source Signal Processor
 Features:
• 4-Band EQ and Line Driver
• Dual Inputs with Level Matching
• Perfect for Add-On MP3 Players
• DIN, ISO Mount EQ Chassis
• Selectable Blue or Red
Illumination
• Built-In 9-Volt Line-Driver
• EQ Controls with 12dB of Boost /
Cut at 45Hz Sub-Bass, 120Hz Mid-Bass at 2.2kHz Mid-Range, 12kHz Treble
• Master Volume & Subwoofer Volume Control
• Front to Rear Dual-Amp Fader
• High-Pass F/ R Crossover / 12dB Slope
• Selectable Subwoofer Output: 50Hz / 80Hz / 120 Hz at 18dBSlope
• For Mono or Stereo Subwoofer Setups
ATK 2/3X 2-Way / 3-Way Active Crossover with Remote Bass Control
 Features:
• For 2- or 4-Channel Inputs
• Sub-In Receivers with
Sub-Outputs
• Bass Remote with 12dB
Bass Boost
• Maxximum 0utput: 8.5-Volts RMS
• For Mono Or Stereo Woofers
• 180° Phase-Shift Switch
• 45Hz Bass Boost With Quasi-Parametric EQ
• Level Adjustments for Front, Rear & Sub Channels
• 2nd Order Butterworth Hi-Pass: Front & Rear Channels
• Use Multiple ATK2/3X via Full-Range Cascade Output
MLX-100 MAXX-LINK™ Universal Link & Sync™ Amplifier Bridging & Synchronization Module
Features:
•Universal Amplifier Bridging Interface
•Permits Interconnecting / Linking Mobile Amplifiers
into a Master and Slave Configuration
•Link up to Five (5) Amplifier pairs
•Remote Level Control with 3-Stage LED Clipping Indicator
•Master / Slave Control Switch
•24dB Adjustable Low-Pass (35Hz to 250Hz)
•Built-in 65 Hz Set-Up Test Tone
•24dB Adjustable Subsonic Filter (15Hz to 35Hz)
•10dB Adjustable Parametric Bass EQ
•Variable Wide / Narrow Bandwidth Control
•0 to 180° Adjustable Phase Control
•2-Ch RCA Audio Pass-Thru
 MM-1 Car Audio iPod®/MP3 Interface
• Compatible With All iPODS,
Satellite Radios, and MP3 Sources
• Noise Canceling Differential Input Design
• Illuminated Analog-Style Master Volume Control
• Installable Indash, Underdash or Inside a
Glovebox
• Accepts a 3.5mm Headphone Jack or 4-Channel
RCA Inputs
• Uncompromising Wide-Frequency Response,
10Hz to 37kHZ
• Variable Input Sensitivity Accepts Wide Range
of Sound Sources
• Low Distortion, Low Noise Design; THD & Noise
<0.03%, S/N > 98dB
The two-piece MM-1 is the music enthusiast’s “Direct to Amp” solution that
creates an uncompromising, hi-fidelity MP3 device input in any amplified car audio system. Our MM-1 eliminates sonic degradation common other MP3 player Bluetooth™ interfaces and FM modulators. This hi-fidelity 4-channel interface module allows any iPod, MP3 player, satellite radio, or other sound source device that has a headphone jack to be played directly through the car stereo system. Nothing is attached or backpacked onto the MP3 player itself and the MM-1 provides automatic audio
switching when MP3 device is turned on. |
